Laser Cutting
As steel cutting technology goes, the CNC Laser is the top of the line. A Laser’s wattage determines the thickness of material it can cut. For instance, our Lasers run at 2000 and 6000 Watts and have the ability to cut up to 1″ stainless steel. Now this can vary based on the type of steel, but let’s use common mild steel as an example- A Laser cut part can be produced with a tolerance of +/- .005 and the Laser has very few limitations relational to shapes, patterns, etc. If quality is what you are after, then the Laser is your best option.
Laser material limitations are as follows:
- Mild Steel 1″ Plate to 26 GA
- Stainless 1” Plate to 26 GA
- Aluminum .190 Plate to .030
We can cut other materials with the Laser but they are reviewed on job-by-job basis. What it comes down to is some materials simply can’t be cut with a Laser or need a different procedure used to protect the material.
Aluminum: we can do 5/8” or 16 gauge.
Etching! Yes, the Laser can etch parts as well. To define etching, several of our clients require part numbers, serial numbers, names, and logos the list goes on and on. The customer is able to provide us with a font type, size, and location and we will take care of the rest.
Equipment Capabilities
|
TruLaser 3030 (L20) |
TruLaser 3040 |
|
| Working range | ||
|
3000 mm | 4000 mm |
|
1500 mm | 2000 mm |
|
115 | 115 mm |
| Max material thickness with TruFlow 3200 | ||
|
20 mm | 20 mm |
|
12 mm | 12 mm |
|
8 mm | 8 mm |
| Max material thickness with TruFlow 4000 | ||
|
20 mm | 20 mm |
|
15 mm | 15 mm |
|
10 mm | 10 mm |
| Max. material thickness with TruFlow 5000 | ||
|
25 mm | 25 mm |
|
20 mm | 20 mm |
|
12 mm | 12 mm |
| Max. axis speed simultaneous | 140 m/min | 140 m/min |
| Dimensions vertical positioning | ||
|
9300 mm | 12000 mm |
|
4600 mm | 5300 mm |
|
2200 mm | 2200 mm |
| Dimensions perpendicular positioning | ||
|
6500 mm | |
|
7600 mm | |
|
2200 mm | |
| Weight | 14000 kg |
The specifications in our offer and our sales are subject to alterations.